Actron CP9175 OBD II AutoScanner User Manual Page 49

  • Download
  • Add to my manuals
  • Print
  • Page
    / 66
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 48
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • A – 1
A-1
Appendix A – Glossary
A/C:
Air Conditioner.
A/D:
Analog to Digital.
A/F:
Air/Fuel ratio. The proportion of air and fuel delivered to the cylinder for
combustion. For example, an A/F ratio of 14:1 denotes 14 times as
much air as fuel in the mixture. Ideally the A/F ratio is 14.7:1.
ABS:
Anti-lock Brake System.
AC Clutch Relay:
The PCM uses this relay to energize the A/C clutch, turning the A/C
compressor on or off.
AC Pressure Sensor:
Measures air conditioning refrigerant pressure and sends a voltage
signal to the PCM.
AC Pressure Switch:
A mechanical switch connected to the A/C refrigerant line. The switch
is activated (sending a signal to the PCM) when the A/C refrigerant
pressure becomes too low or high.
Actuator:
Actuators such as relays, solenoids, and motors allow the PCM to
control the operation of vehicle systems.
Air Injection Reaction (AIR) System:
An emission control system operated by the PCM. During cold starts,
an air pump injects outside air into the exhaust manifold to help burn hot
exhaust gases. This reduces pollution and speeds warm-up of oxygen
sensors and catalytic converters. After the engine is warm, the air will
either be “dumped” back to the atmosphere (or into the air cleaner
assembly) or sent to the catalytic converter.
APP:
Acceleration Pedal Position (Sensor.)
ASR:
Acceleration Slip Regulation.
Page view 48
1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 65 66

Comments to this Manuals

No comments