Actron AutoScanner® CP9575 User Manual download pdf (Page 7)

a faulty component or system. Pending DTCs convert to Diagnostic

Trouble Codes when an emissions problem persists long enough to

be considered a real problem, not an anomaly. Pending DTCs are

indicated by a  icon.

Vehicle Selection

VehicleSelectionwillbedisplayedforReadCodeswhenamanufacturer

specicDTCisretrievedfromthevehicle.

Erase Codes

The Erase function performs the following:

9 Erases Codes (both Diagnostic Trouble Codes and Pending

DTCs)

9 May erase Freeze Data results depending on the vehcle.

9 Sets I/M Monitors to not ready.

NOTICE

Perform Erase Codes function only after systems have

been checked completely and DTCs have been written

down.

To erase codes from the vehicle computer:

1. Set the ignition to Key On and Engine Off. Do NOT start the

vehicle. The engine should not be running.

2. Press and hold the ERASE key for 3 seconds then release, or

Select Erase Codes from Main Menu and press ENTER.

3. Whentheconrmationmessageappearsonthedisplay,choose

one of the following options.

• To proceed with the operation: Press ENTER for YES.

• To cancel the operation and return to the Main Menu: Press

BACK for NO.

The Tool will automatically perform the Read Codes function after

erasing codes. The Tool will then indicate the number of codes

remaining.

NOTICE

If after erasing codes a DTC returns, the problem has

notbeenxedorotherfaultsarepresent.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

No comments

Actron AutoScanner® CP9575 User Manual Page 7