Actron CP9135 Specifications download pdf (Page 21)

Using the Tool

3-8

Each time you press a key, its name

should appear on the display. For

example, if you press the

▲ /YES

key, the screen will display

“UP / YES.” If key’s name does not

display, then the key is not working. Press the other keys to verify

proper operation.

Check the BACK key last. When

the BACK key is pressed, the

AutoScanner will return to the Tool

Setup/Test menu. If you are not

returned to this menu, then the

BACK key is not working.

3.6.4 Memory Test

If the AutoScanner has trouble performing functions, the Memory

Test should be performed.

From the Tool Setup/Test menu,

select the Memory Test option and

press ENTER to begin.

As the memory is tested, its address is displayed on the bottom line.

After the memory test is done, either a “TEST PASS” or “TEST FAIL”

message is displayed.

Press any key to return to the Tool Setup/Test menu.

3.6.5 Software Identification (SW ID)

The Software Identification is needed when contacting customer

support. Note this in the manual for reference.

From the Tool Setup/Test menu, select the SW ID option and press

ENTER. Note this in the manual for reference.

Press any key to return to the Tool Setup/Test menu.

UP / YES

Press Any Key

BACK

Leaving Keypad Test

Tool Setup

4)Memory Test ]

ROM Test

Testing Addr a500

TEST PASS

Press Any Key

Tool Setup

5)SW ID ]

SW ID: 47H5

Press Any Key

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 119 120

Comments to this Manuals

No comments

Actron CP9135 Specifications Page 21

Comments to this Manuals